Subscribe my articles from SELaplana:
Delivered by FeedBurner
 

Disabling Password in CMOS

It is just easy to disable password protect in a PC system either for SETUP only or for the entire system using the CMOS.

First you have to find a 3 pin for Jumper. For motherboards which has labeled the jumper for the CMOS, we will have no problem looking for it. Anyway there are only few 3pin for jumper standing on your mother board especially if the mother board you have has been released from 2001 and later.

If you are not sure which of them, just try these steps.
  1. Try disconnecting the CMOS battery for a couple of seconds. Then return it back and turn on your computer. If the password protection has been disabled by this method, then you are already successful diabling it, else, follow the next procedure.
  2. Look for any 3 pins for jumper set on your mother board. If pin 1 and pin 2 has been connected by the jumper, transfer the jumper to connect pin 2 and pin 3 and wait for a couple of seconds. Then return the jumper to pin 1 and pin 2 connections. Switch on your computer. Or you can repeat this step to other set of 3 pins with jumper you have found on your mother board. Then you can switch on your computer. I think, this will be the last step you may have and you'll be successful in disabling the CMOS password protection.
But take note, be sure that your computer is disconnected from the power or has been switched off before doin any of the following steps.
Search Lyrics by Artists: 0-9 - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z